firmware and CF cards...

Questions, comments and suggestions regarding Phase One IQ4, IQ3, IQ2 and IQ1 series digital camera backs.

firmware and CF cards...

Postby NNN634765026651517356 » Sat Aug 01, 2015 12:55 pm

hello,
I'm use an IQ 160 and a df (run fw1.58)
after I install the 5.20.1 FW in the back
this one don't want to write on my Kinston CF 32 Ultimate 600 X
it appear #220 error (can not store, card communication problem)or #203

I' ve made a test with FW6.01.8 the problem is the same

In all case , I can use normally my old sandisk extreme III. but the kingston's cards are impossible to use.

and in thetered the back run normally

maybe the problem was older, cause it's very rare that I shoot on cards , I'm always connects at the studio

I had in May a problem while running the 5.20.1 fw

the back was not connected for the first time since one year ago, and it "overheating"and the firmware was broken during the shoot. the card was very hot , at this time I think that it was due to the weather (it was a very sunny day in the south of France ).

Thank's
Dan
Last edited by NNN634765026651517356 on Sun Aug 02, 2015 10:56 pm, edited 2 times in total.
NNN634765026651517356
 
Posts: 4
Joined: Thu Jun 28, 2012 6:51 pm
Location: Cannes

Re: firmware and CF cards...

Postby NNN634765026651517356 » Sat Aug 01, 2015 3:02 pm

I made a new test with the 5.14.29 and I have the same problem

With the 5.11.36 I can shoot on my Kingston 32g 600X
NNN634765026651517356
 
Posts: 4
Joined: Thu Jun 28, 2012 6:51 pm
Location: Cannes


Return to Phase One IQ4, IQ3, IQ2 and IQ1 series camera backs



Who is online

Users browsing this forum: No registered users and 0 guests