Flex Adapter Focus

Question regarding:
Phase One H25, H20, H101, H10, H5, LightPhase, PowerPhase FX / FX +, PowerPhase, PhotoPhase and StudioKit.
Leaf Aptus-II, Aptus S, Aptus, Valeo, C-Most, Cantare, Volare and DCB.

Flex Adapter Focus

Postby Lane » Mon Aug 11, 2014 3:03 pm

Have a Leaf Aptus IIwith a Mamiya mount on a Flex Adapter for a Cambo. Does the ground glass on the Flex Adapter have to be changed with various back adapters? The problem is that focus is not aligned between the two. The ground glass appears to be 3 or 4 millimeters different from the level of the sensor. As you can imagine, it makes focusing a challenge.
User avatar
Lane
 
Posts: 6
Joined: Tue Jan 06, 2009 7:11 pm
Location: Dallas, TX, US

Re: Flex Adapter Focus

Postby Ulf » Tue Aug 12, 2014 7:59 am

Hi

The Flexadapter which is a Phase One solution does not require any change between back mounts.
The insert for the specific mount takes care of this.
Since there is very few mechanical parts on the adapter it sounds more likely that the back be off.
That should of course be verified with another camera.

Contact your local Mamiya-Leaf or Phase One representative for assistance.
Ulf
Crew
Crew
 
Posts: 3442
Joined: Wed Oct 06, 2004 1:52 pm
Location: Copenhagen Denmark


Return to Phase One and Leaf Legacy one-shot and scan camera back



Who is online

Users browsing this forum: No registered users and 1 guest