stop the call for the camera

Discussions, questions, comments and suggestions regarding Capture One PRO, Capture One PRO(For Sony), Capture One DB and Capture One Express(For Sony) 11.x for Mac

stop the call for the camera

Postby LarsH » Sat Dec 08, 2018 6:58 pm

Hi, if the camera is connected (see below), C1 calls I shall exact do this: connect the camera; wild blinking. More is not possible, so it is necessary to use another programm (Digit Im) to brind the pics to the mac.
How can this be stopped. C1 shall do nothing before import. Thx, lars
C1 pro 12.1, macbook pro, 10.13.6, X-pro2 | LarsHennings.de
LarsH
 
Posts: 112
Joined: Tue Sep 25, 2018 12:46 pm
Location: Berlin, Ger

Re: stop the call for the camera

Postby Eric Nepean » Sat Dec 08, 2018 7:58 pm

Hi Lars
About all one can really extract from your posting is that when you connect some camera (manufacturer unknown, model unknown, firmware unknown) by some undefined cable to some kind of Mac (OS unknown) and CO 11 is running (exact version unknown, setup steps undefined) then wild blinking occurs.

But it does work with some other kind of software which Google cannot find.

And we see that your are frustrated (understandably so)

This is quite mysterious, shall people provide hints to connect a Sony A7r2 or perhaps a Nikon d500? CO 11.2 or 11.31? iMac? OSX 10.14? 10.13? 10.12?

To make it possible to get useful suggestions perhaps you could clarify some of these many unknowns.

If you have not already done so, check on the Capture One list of supported cameras if your camera is supported by Capture One 11 for thethering, is the firmware version sufficient.

Then there is a very useful series of articles here: https://imagealchemist.net/capture-one- ... explained/
Cheers, Eric
[late 2015 iMac, 4GHz i7, 24GB RAM, external SSDs. GX8, E-M1, GX7, GM5, GM1 ....]
Eric Nepean
 
Posts: 500
Joined: Sat Oct 25, 2014 8:02 am
Location: Ottawa

Re: stop the call for the camera

Postby LarsH » Sat Dec 08, 2018 9:17 pm

Thanks, Eric, but most is known. Please have a look to the underline. But there is no frustration, even not for tether is not ok to this time (but not to discus, please, I did it with the support and Fuji). I hoped to find easy a way to stop it. Best to you, lars
C1 pro 12.1, macbook pro, 10.13.6, X-pro2 | LarsHennings.de
LarsH
 
Posts: 112
Joined: Tue Sep 25, 2018 12:46 pm
Location: Berlin, Ger

Re: stop the call for the camera

Postby LarsH » Sun Dec 09, 2018 9:36 am

Ok, may be the problem is this: if C1 is open and the camera will be connected with: USB-card-reader for transfer images to the mac, C1-11 is awaked: there is a camera, have to work. But the call by C1-11 for a camera means: connect it with: USB-tethering-auto.
That means: stop the camera, disconnect the cable, change the menu, connect the cable, start the camera; then tethering is possible, but only with setting it on the camera (in C1-11 are not all settings open). Hard work, but Phase One will not repair it for -11... Reg., lars
C1 pro 12.1, macbook pro, 10.13.6, X-pro2 | LarsHennings.de
LarsH
 
Posts: 112
Joined: Tue Sep 25, 2018 12:46 pm
Location: Berlin, Ger


Return to Capture One 11.x Software



Who is online

Users browsing this forum: Google [Bot] and 3 guests