Problems w Credo 60 for Series V & firmware 2.01

Questions, comments and suggestions regarding Leaf Credo series digital camera backs.

Problems w Credo 60 for Series V & firmware 2.01

Postby Rogerxnz » Thu Sep 12, 2013 7:38 pm

I installed firmware 2.01 on my Credo 60 for Series V and I have noticed many issues, including:

• There is no dialogue warning that the CF card is full—the back just refuses to record data;

• Liveview freezes especially when I go into 100% view; and

• I get a warning, if there is a long interval between shots, that the back has lost connection and I have to shut it down and restart to continue.

I used the option on the back to restore the firmware to the factory version and I had Liveview working at 100%! I then reinstalled firmware 2.01 and Liveview froze as before. So, I have gone back to the factory firmware

Has anyone experienced similar problems with 2.01?
Roger
Rogerxnz
 
Posts: 13
Joined: Wed Aug 18, 2010 10:09 pm

Re: Problems w Credo 60 for Series V & firmware 2.01

Postby yaya » Fri Sep 13, 2013 10:15 am

Hi Roger, would you mind creating a support case and sending us all this info? This will hall us investigate it further as these issues seem odd. I have a similar back to yours and it works fine.

Thanks!

http://www.phaseone.com/en/SupportMain/ContactSupport.aspx
yaya
Crew
Crew
 
Posts: 297
Joined: Mon Sep 21, 2009 9:34 pm
Location: London

Re: Problems w Credo 60 for Series V & firmware 2.01

Postby Rogerxnz » Mon Sep 16, 2013 7:33 pm

Thanks, Yair.
I will do so.
Roger
Rogerxnz
 
Posts: 13
Joined: Wed Aug 18, 2010 10:09 pm


Return to Leaf Credo series camera backs



Who is online

Users browsing this forum: No registered users and 1 guest