Page 1 of 1

Adapter Plate

PostPosted: Mon May 28, 2012 10:18 am
by HDB
I have an Hasselblad V and Mamyia RZ67. I would like to use the same Digital back for these 2 cameras. it's possible with the adaptater plate ?

Best regards,

HDB

Re: Adapter Plate

PostPosted: Mon May 28, 2012 2:43 pm
by yaya
Hi HDB,

Yes if your back is in V mount then you can use an adapter plate to fit it onto your RZ

Hope this helps

Yair

Re: Adapter Plate

PostPosted: Mon May 28, 2012 5:29 pm
by HDB
Hello Yaya,



Can I adapt the back V on the 645 with a plate ?
May I use my old lens Hasselblad/Mamiya on body 645 phaseone/Mamiya?

Thanks for answer

HDB

Re: Adapter Plate

PostPosted: Tue May 29, 2012 6:36 am
by yaya
HDB wrote:Can I adapt the back V on the 645 with a plate ?
Nope
May I use my old lens Hasselblad/Mamiya on body 645 phaseone/Mamiya?
Yes, for the Hasselblad V lenses you will need an adapter which you can order from your Mamiya Leaf dealer. With older Mamiya lenses you will be able to fit them straight one and you will get focus confirmation. Aperture control is manual and you'll have to stop down manually for metering.

Hope this helps

Yair