IQ4 HDMI specs

Questions, comments and suggestions regarding Phase One IQ4, IQ3, IQ2 and IQ1 series digital camera backs.

IQ4 HDMI specs

Postby NNN637196413732704884 » Thu May 14, 2020 12:04 pm

Hi everyone,

we are a french cgi studio, and we are currently reviewing the IQ4 specs for an upcoming shooting.
We did some tests to get the IQ4 work with a Augmented Reality system, so the photographer can see in a livefeedback his framing with a 3D model of a car which is matchmoved in realtime. That way, he can shoot backplates with the virtual car directly onset.

We are using the HDMI output to achieve that, BUT, we ran into some weird issues. First of all, to convert from HDMI to USB-C, we are using a Blackmagic ultrastudio minirecorder. It converts the HDMI signal to a live stream on the computer. It works with every camera we used so far, but not the IQ4. There doesn't seem to be able to handle the signal.

Of course, we tested the IQ4 HDMI output with a TV, monitor, etc, and it works well. On most of them. Because, some tvs were not able to handle the signal.

So, here is my question. What are the precise specs of the HDMI output? Is it HDMI 1.0, 1.4, 2.0? Is it a 4K signal? Is it a 1080p60 or 1080p50 signal?

I hope my explanations were clear enough. Thank you for your kind answers and enlightments.

Fred
NNN637196413732704884
 
Posts: 1
Joined: Thu Mar 12, 2020 9:22 pm

Re: IQ4 HDMI specs

Postby bml » Sat May 16, 2020 8:41 am

If you bought the IQ4, you should open a support case with your questions at https://www.phaseone.com/fr-FR/SupportMain
If you use test-equipment, your sales representative should answer your questions.
bml
 
Posts: 34
Joined: Sun Jun 29, 2014 9:04 pm


Return to Phase One IQ4, IQ3, IQ2 and IQ1 series camera backs



Who is online

Users browsing this forum: No registered users and 2 guests