USB 3.0 to Ethernet adapter with iXA180

Questions, comments and suggestions regarding Phase One IQ4, IQ3, IQ2 and IQ1 series digital camera backs.

USB 3.0 to Ethernet adapter with iXA180

Postby NNN635938378088797420 » Thu Mar 17, 2016 7:11 pm

I am trying to connect to an iXA180 with USB 3.0 but using two USB3.0 to Ethernet adapters, one at the PC and a second at the camera with Cat-5 in between. Does anyone have any experience with this? I got two GWC Super Speed USB 3.0 adaptors but what I didn't realize is that I had to install driver software on my PC for it to work and obviously I can't install the same driver software on the camera. Is anyone aware of any adapters like this that work with these cameras?

The reasoning for this is I have a remote sensor that I want to just run a single Ethernet cable too. There will be a Ethernet switch and a few other Ethernet devices in the remote sensor module I will still need Ethernet even if I used USB 3.0 range extenders like those provided by corning.

Thanks in advance for any help or advice.
NNN635938378088797420
 
Posts: 1
Joined: Thu Mar 17, 2016 7:56 pm

Return to Phase One IQ4, IQ3, IQ2 and IQ1 series camera backs



Who is online

Users browsing this forum: No registered users and 4 guests