IQ180 & PhaseOne 645AF

Questions, comments and suggestions regarding Phase One IQ4, IQ3, IQ2 and IQ1 series digital camera backs.

IQ180 & PhaseOne 645AF

Postby christophecordier » Mon Jan 04, 2016 3:24 pm


(please excuse me for my english).

I work for heritage archives in France and we just bought an IQ180 in order to replace the old P45+.
The firmware of the IQ180 is 6.06.5 and the firmware of the 645AF is 1.5.
But that doesn't work.
Message on the 645AF is "_no_ fb", the mirror stay stuck upright and worst of it, I can't use again the P45+ (same error message).

I don't understand because Ulf Liljegren of PhaseOne as already answer yes at the question here, if the IQ180 can be used with AF body.

Any idea anyone at PhaseOne staff ?


Posts: 2
Joined: Mon May 04, 2015 9:30 am

Re: IQ180 & PhaseOne 645AF

Postby Drew » Mon Jan 04, 2016 4:35 pm

Check the Knowledge Base... ... nguageid=1

You want a firmware for the IQ1 prior to version 5.10. Firmware.
It's best if you touch base with Support directly rather than the forum and they can both get you the firmware and walk you through the proper update process.
Posts: 4370
Joined: Thu Mar 27, 2008 2:34 pm
Location: Copenhagen, DK / NY, NY

Re: IQ180 & PhaseOne 645AF

Postby Niek » Fri Feb 12, 2016 6:07 pm

My IQ 180 back attached to the 645 DF just display's a black and white image overnight.
Yesterday it worked perfect but now I'm only getting a black and white preview.
The images imported in Capture One look okay.
What to do?
Thanks for the reply.
Niek Erents
C1 user since 1997
Posts: 1
Joined: Tue Jan 20, 2009 8:44 am

Re: IQ180 & PhaseOne 645AF

Postby Ulf » Fri Feb 19, 2016 8:29 pm


You must have enabled black and white view by mistake.
Press play -> In the contextual menu bottom right you can choose to enable or disable black and white view.
Posts: 3593
Joined: Wed Oct 06, 2004 1:52 pm
Location: Copenhagen Denmark

Return to Phase One IQ4, IQ3, IQ2 and IQ1 series camera backs

Who is online

Users browsing this forum: No registered users and 2 guests