Page 1 of 1

firmware and CF cards...

PostPosted: Sat Aug 01, 2015 12:55 pm
by NNN634765026651517356
hello,
I'm use an IQ 160 and a df (run fw1.58)
after I install the 5.20.1 FW in the back
this one don't want to write on my Kinston CF 32 Ultimate 600 X
it appear #220 error (can not store, card communication problem)or #203

I' ve made a test with FW6.01.8 the problem is the same

In all case , I can use normally my old sandisk extreme III. but the kingston's cards are impossible to use.

and in thetered the back run normally

maybe the problem was older, cause it's very rare that I shoot on cards , I'm always connects at the studio

I had in May a problem while running the 5.20.1 fw

the back was not connected for the first time since one year ago, and it "overheating"and the firmware was broken during the shoot. the card was very hot , at this time I think that it was due to the weather (it was a very sunny day in the south of France ).

Thank's
Dan

Re: firmware and CF cards...

PostPosted: Sat Aug 01, 2015 3:02 pm
by NNN634765026651517356
I made a new test with the 5.14.29 and I have the same problem

With the 5.11.36 I can shoot on my Kingston 32g 600X