Digital Backs for Mamiya RB67

Questions, comments and suggestions regarding Phase One IQ4, IQ3, IQ2 and IQ1 series digital camera backs.

Digital Backs for Mamiya RB67

Postby NNN635318277101679603 » Sat Jul 05, 2014 1:16 am

Does Phase One produce a digital back for the Mamiya RB67? I'm using one as a film camera and would love to put a digital back on it.
NNN635318277101679603
 
Posts: 2
Joined: Mon Mar 31, 2014 2:55 am

Re: Digital Backs for Mamiya RB67

Postby Ulf » Mon Jul 07, 2014 11:12 am

Hi

There is two ways to go about this.

We do have a RB adapter for backs with Hasselblad V fitting.
This is the cheaper option.

Another option is to get a Mamiya RZ PROIID with a M645 adapter and then a Mamiya fitting back.
The RZ PROIID can be used with RB lenses.
An advantage with this is that the back can be used on a Phase One 645 DF+ as well as the RZ
Ulf
Crew
Crew
 
Posts: 3509
Joined: Wed Oct 06, 2004 1:52 pm
Location: Copenhagen Denmark

Re: Digital Backs for Mamiya RB67

Postby FPL » Fri Nov 27, 2015 2:46 pm

I'm using Phase One P65+ on RB67 Pro-SD. You need "dumb adapter" Mamiya HX-704 and cable release with wake-up signal from KaptureGroup.
FPL
 
Posts: 49
Joined: Tue May 20, 2014 11:31 am

Re: Digital Backs for Mamiya RB67

Postby Ulf » Fri Nov 27, 2015 3:47 pm

This is of course and option.
However the two options I suggested no wake up is required.
Ulf
Crew
Crew
 
Posts: 3509
Joined: Wed Oct 06, 2004 1:52 pm
Location: Copenhagen Denmark


Return to Phase One IQ4, IQ3, IQ2 and IQ1 series camera backs



Who is online

Users browsing this forum: No registered users and 2 guests