Can Leaf Credo 80 update the firmware for iq 180?

Questions, comments and suggestions regarding Phase One IQ4, IQ3, IQ2 and IQ1 series digital camera backs.

Can Leaf Credo 80 update the firmware for iq 180?

Postby NN637253687901721325UL » Tue Jun 15, 2021 7:01 am

I dump the log of credo 80,here is some log :
Product : Credo 80 S/N: LQ000XXX
=============================================
Firmware Version Information
=============================================
BootCode 1.01
Firmware 4.01.2 Feb 10 2016
---------------------------------------------
Firmware Folder N:\User Running Code
---------------------------------------------
MainCode.bin 7.04.49 7.04.49 Release, Feb 10 2016 13:19:01
Fpga.bin 3.00 3.00
Dpld.bin 1.01 1.01
Tgen.bin 2.0 2.0
CifCode.bin 7.04.8 7.04.8
UtilCode.bin 7.04.10 7.04.10
Fonts.bin 1.03 1.03
Images1.bin 1.02 1.02
Images2.bin 1.02 1.02
Images3.bin 1.04 1.04
Images5.bin 1.10 1.10
---------------------------------------------
Languages
---------------------------------------------
CItalian.lan 1.12
CFrench.lan 1.12
CJapan.lan 1.12
CSpanish.lan 1.12
CChinese.lan 1.11
CGerman.lan 1.12
CRussian.lan 1.13
=============================================

Trace log (Entries from 0 to 144 (145) of 145):

Time (uSec) Thread name Type Log entry
======================================================================================================================================
000000284708 Configurator I ResetType: PowerOn
000000308734 Configurator I ProductConstants::SetupValues() - IQ180
000000374946 Configurator I ERROR: Calibration file doesnt contain the correct subcalibration 1 (0x00000000)
000000374992 Configurator I ERROR: Calibration file doesnt contain the correct subcalibration 1 (0x00000000)
000000377716 Configurator I HwRevision=2
000000796174 Configurator I Loading fpga (Checksum match)...
000000987354 Configurator I Loading fpga done
000000987378 Configurator I FPGA DCMStatus = 00000006
000001490630 Configurator I Turn CCD3V6 ON
000001490904 Configurator I Turn CCD5V5 ON
000001492236 Configurator I Turn CCD14V5 ON
000001492508 Configurator I Turn CCD21V ON
000001497312 Configurator I =============================================
000001497332 Configurator I Hardware Version Information
000001497346 Configurator I =============================================
000001497366 Configurator I DB HW ID : 6 (50100445, 1240, 4203)
000001497390 Configurator I CCD HW ID : 0
000001497400 Configurator I UTL board present : Yes
000001497414 Configurator I CIF board present : Yes
000001497426 Configurator I CCD board present : No
000001497444 Configurator I Product : Credo 80 S/N: LQ000045
000001497464 Configurator I =============================================
Firmware Version Information
=============================================
000001497518 Configurator I BootCode 1.01
000001497538 Configurator I Firmware 4.01.2 Feb 10 2016
000001497558 Configurator I ---------------------------------------------
000001497580 Configurator I Firmware Folder N:\User Running Code
000001497600 Configurator I ---------------------------------------------
000001497626 Configurator I MainCode.bin 7.04.49 7.04.49 Release, Feb 10 2016 13:19:01
000001497670 Configurator I Fpga.bin 3.00 3.00
000001497698 Configurator I Dpld.bin 1.01 1.01
000001497732 Configurator I Tgen.bin 2.0 2.0
000001497764 Configurator I CifCode.bin 7.04.8 7.04.8
000001497792 Configurator I UtilCode.bin 7.04.10 7.04.10
000001497822 Configurator I Fonts.bin 1.03 1.03
000001497850 Configurator I Images1.bin 1.02 1.02
000001497880 Configurator I Images2.bin 1.02 1.02
000001497906 Configurator I Images3.bin 1.04 1.04
000001497934 Configurator I Images5.bin 1.10 1.10
000001503086 Configurator I RTC time read from HW valid=1
000001765410 Configurator I NoOfFocusMasks set to 1
000001778916 Configurator I SetHostPresent(0)
000001779568 Configurator I USB2 support initialized
000001780164 CaptureManager I Setting up CCD to run in Normal mode...
000001782100 Configurator I USB3 support initialized
000001801736 Configurator I Configure XF Protocol
000001801982 Configurator I Reset Pip Manager
000001801994 Configurator I Active Protocol Version: 1.0
000001802032 Configurator I Initial: 1802
000001802768 Configurator I WiFiManager created
000001802806 CameraInterface I Camera disconnected
000003092808 Configurator I Read from resourceFile
000004006764 Configurator I Read from resourceFile
000004799828 Configurator I Read from resourceFile
000005105064 UsbManager I USB3 starting device
000005153332 CameraInterface I Camera Connected
000005155878 CameraInterface I Send Reset Protocol
000005171894 Configurator I Configuration took 5171ms

--------------------------------------------
I think it's the same hardware with iq180, so can it update the firmware for iq180?
thanks.
NN637253687901721325UL
 
Posts: 2
Joined: Mon May 18, 2020 4:19 am

Re: Can Leaf Credo 80 update the firmware for iq 180?

Postby Ulf » Tue Jun 15, 2021 9:02 am

HI
You cannot run the same firmware in a Credo as IQ even if some hardware are shared.

If you have issue with the camera back, then contact support
Http://support.phaseone.com
Ulf
Crew
Crew
 
Posts: 3611
Joined: Wed Oct 06, 2004 1:52 pm
Location: Copenhagen Denmark

Re: Can Leaf Credo 80 update the firmware for iq 180?

Postby NN637253687901721325UL » Tue Jun 15, 2021 10:05 am

thanks.
I want new firmware for credo as iq.
NN637253687901721325UL
 
Posts: 2
Joined: Mon May 18, 2020 4:19 am


Return to Phase One IQ4, IQ3, IQ2 and IQ1 series camera backs



Who is online

Users browsing this forum: No registered users and 3 guests

cron