H20 on Fuji Gx680 slow shutter speed =blurry purple image !!

Question regarding:Phase One H25, H20, H101, H10, H5, LightPhase, PowerPhase FX / FX +, PowerPhase, PhotoPhase and StudioKit.
Leaf Valeo, C-Most, Cantare, Volare and DCB.

H20 on Fuji Gx680 slow shutter speed =blurry purple image !!

Postby NN854722 » Tue Feb 05, 2008 1:43 pm

My H20 works fine on Hasselblad 500CM even on slow speed as 1s. But when H20 fit on my GX680, it only works fine at / above 1/60s. Purple blurry edge produce around image if speed is at /slower then 1/30s. Anyone has the same problem? Thanks. Benny
NN854722
 
Posts: 16
Joined: Wed Sep 19, 2007 1:23 am

Postby Jon » Tue Feb 05, 2008 3:37 pm

Hi Benny,

This generally happens when the shutter is lagging. The shutter is remaining open longer than it should and the CCD is being exposed during the black calibration/readout. You should also check the batteries and settings on your Kapture Group adapter.
Kind Regards,
Jon Gilbert
Phase One
Jon
Crew
Crew
 
Posts: 1233
Joined: Fri Jul 06, 2007 6:48 pm
Location: New York, USA

Re: H20 on Fuji Gx680 slow shutter speed =blurry purple image !!

Postby NN83301 » Wed Nov 12, 2008 6:06 pm

Have seen more people with this problem out there. It seems to be a lens problem.

i am looking at a hassy with H20 that has the same problem.

Did U find any solution other than the lens?
NN83301
 
Posts: 2
Joined: Sat Nov 01, 2008 2:38 pm


Return to Phase One and Leaf Legacy one-shot and scan camera back



Who is online

Users browsing this forum: No registered users and 2 guests