Mirror Lockup RZPro11

Question regarding:
Phase One H25, H20, H101, H10, H5, LightPhase, PowerPhase FX / FX +, PowerPhase, PhotoPhase and StudioKit.
Leaf Aptus-II, Aptus S, Aptus, Valeo, C-Most, Cantare, Volare and DCB.

Mirror Lockup RZPro11

Postby Matthew1 » Tue Dec 21, 2004 11:15 pm

I am using the H-20 and the RZPro11. I have noticed at shutter speeds less than 1/60, there is slight camera movement caused by the mirror action. Is it possible to lock up the mirror with this body without a time-out error occuring. Also, is the mirror lock-up mode enable button located in the Capture One software only for Hassleblad? Thanks, Matthew
Matthew1
 
Posts: 8
Joined: Tue Dec 21, 2004 11:08 pm
Location: Dallas, Texas

Postby Ulf » Wed Dec 22, 2004 10:39 am

Mirror up functions with Mamiya RZ works great.
There is a special cable for the mirror up functions from Mamiya or else you can use a normal release cable to the lense.
Shooting sequence will be to press normal release button and then following fire the release cable attached to the lense.
Ulf
Crew
Crew
 
Posts: 3524
Joined: Wed Oct 06, 2004 1:52 pm
Location: Copenhagen Denmark

Postby Matthew1 » Thu Feb 17, 2005 6:51 pm

Thanks Ulf, the mirror lock up works perfect.
Matthew1
 
Posts: 8
Joined: Tue Dec 21, 2004 11:08 pm
Location: Dallas, Texas


Return to Phase One and Leaf Legacy one-shot and scan camera back



Who is online

Users browsing this forum: Google [Bot] and 9 guests