Page 1 of 1

sensor cleaning Leaf Aptus 22

PostPosted: Wed Jul 01, 2015 3:30 pm
by NN635296227693158650UL
hello

I have the kit digiclean Phase One but I wonder if with this kit I can clean my Leaf Aptus 22?

It comes with two liquids one A and one B

The sensor can be cleaned my aptus leaf with these liquids ?


https://www.youtube.com/watch?v=oyBD7PDhdQs

Re: sensor cleaning Leaf Aptus 22

PostPosted: Thu Jul 02, 2015 11:29 am
by Ulf
Hi

First I hope you have an IR filter which need cleaning and not a "sensor" right?

You can use solution B to clean the IR glass.
The solution A is only needed if it is incredibly dirty but then you will also use quite a bit of time getting solution A of the glass as well so stick to the B solution.

If you do not have an IR filter or clear cover glass replacement for IR filter then I suggest you get the sensor cleaned by us instead.

Re: sensor cleaning Leaf Aptus 22

PostPosted: Sun Jul 05, 2015 10:02 pm
by NN635296227693158650UL
Ulf wrote:Hi

First I hope you have an IR filter which need cleaning and not a "sensor" right?

You can use solution B to clean the IR glass.
The solution A is only needed if it is incredibly dirty but then you will also use quite a bit of time getting solution A of the glass as well so stick to the B solution.

If you do not have an IR filter or clear cover glass replacement for IR filter then I suggest you get the sensor cleaned by us instead.



What is the IR filter?

my digital back Leaf Aptus 22 is the ( first generation )

http://www.bhphotovideo.com/c/product/8 ... _back.html That's who buy in bhphoto

Re: sensor cleaning Leaf Aptus 22

PostPosted: Mon Jul 06, 2015 1:44 pm
by Ulf
Just look at the sensor.
If there is a green-ish glass (like there is on the B&H images) then this is a IR glass that sits above the sensor.
If there is not then you see the sensor as a grey.

Re: sensor cleaning Leaf Aptus 22

PostPosted: Tue Jul 07, 2015 10:48 pm
by NN635296227693158650UL
Ulf wrote:Just look at the sensor.
If there is a green-ish glass (like there is on the B&H images) then this is a IR glass that sits above the sensor.
If there is not then you see the sensor as a grey.




clean with the solution B PhaseOne everything right, but still looks as if he did not leave grease stuck .

you should use the solution "A" ?

Re: sensor cleaning Leaf Aptus 22

PostPosted: Wed Jul 08, 2015 12:01 am
by Ulf
No. If it is clean, it is clean.