Page 1 of 1

PHASE ONE H10 + DYNEX DX-ECFW

PostPosted: Wed Dec 10, 2014 1:23 am
by NNN635121697078029620
Hi,
I'm an owner of a Phase One H10, I've used many many times with a firewire cable ad a macbookpro.
Now macbook is dead, I've bought a Fujitsu with Intel I7 and I've bought a Firewire 800 expresscard.
The problem is that don't work, the leds on the back side are turn off.
I've read in the istructions of the Dynax that is possible that some products plug if are not eletrify don't works, so I've bought an AC Adapter 12V for the Dynex.
Now I can see light just for a second but is a very low light, and in any case don't works.

Is possible that is the AC power?

Have you any suggest??

Kind regards in advance.


Antonio

Re: PHASE ONE H10 + DYNEX DX-ECFW

PostPosted: Sat Dec 13, 2014 2:26 am
by Ulf
Sound like the AC solution does not provide enough power.
It should be rated up to 1.5amp