phase one DF+ LS80 and P30+

Discussions regarding Phase One 645 DF / DF+ and Mamiya 645 DF / DF+
Also lens discussion for Phase One and Schneider lenses.

phase one DF+ LS80 and P30+

Postby NNN636452453518237846 » Sat Jan 06, 2018 12:19 pm

Hello

I hope that it is a not a double post.

I just bought a DF+ with a LS 80 mm.

I have 645AFDIII and a P30+ .

I managed to attach the DF+ with and the P30+. When I switch the LS 80 mm to the body, and turn on the body. the LS is set to FS "Focal Shutter" on the screen of the DF+ and thus I have no autofocus at all. When I put any of my mamiya lens for example the 80 mm Sekor D. I have no problem at all.

Is there a compatibility issue between the DF+, the LS 80 mm and the P30+ ? or how do I switch back the LS 80 mm to "LS" on the body ?

thanks for help !
NNN636452453518237846
 
Posts: 21
Joined: Thu Nov 02, 2017 7:49 pm

Re: phase one DF+ LS80 and P30+

Postby C-M-B » Sat Jan 06, 2018 6:11 pm

if your custom functions you can select which shutter method (LS / FS) the camera is going to use for which mode. I think LS isn't available for all modes but the manual has all the necessary infos.
C-M-B
 
Posts: 228
Joined: Thu Feb 25, 2010 4:57 pm

Re: phase one DF+ LS80 and P30+

Postby NNN636452453518237846 » Mon Jan 08, 2018 10:08 pm

Hello,

Thanks for the answer.

I have a P30+ back. so I can not customize the LS from the back. The manual of the DF+ is meant for DF+ with a IQ back.

So I don't understand why the Schneider LS switched to FS and lost autofocus ? Or the LS series of lenses with P+ back can work only in manual ?

thanks for any help.
NNN636452453518237846
 
Posts: 21
Joined: Thu Nov 02, 2017 7:49 pm

Re: phase one DF+ LS80 and P30+

Postby C-M-B » Wed Jan 10, 2018 7:35 pm

There's no need to use the back, those Custom Functions can be controlled by the camera (CF).

As to why it lost autofocus - do you mean it doesn't do continous autofocus or no autofocus at all?
C-M-B
 
Posts: 228
Joined: Thu Feb 25, 2010 4:57 pm

Re: phase one DF+ LS80 and P30+

Postby Jon » Thu Jan 11, 2018 8:56 pm

Leaf shutter will operate between 1 second and 1/800s with a P30+ attached. Make sure the lens is set to AF on the lens barrel as well as on the small dial on the front of the camera.

Turn the mode dial to CF and press and hold the +/- button for a few seconds until it beeps. This will reset all custom functions. then Turn the dial back to M or other capture mode and try it out.
Kind Regards,
Jon Gilbert
Phase One
Jon
Crew
Crew
 
Posts: 1229
Joined: Fri Jul 06, 2007 6:48 pm
Location: New York, USA

Re: phase one DF+ LS80 and P30+

Postby NNN636452453518237846 » Sun Jan 14, 2018 11:46 am

Thanks for answers. it finally worked. :D

Schneider LS lens seems to be very good but a bit picky ...

One more question, if I may. I could not find in the support page of phase one which is the current version of the firmware of DF+ : is it still 2,27 ?

Have a good day !
NNN636452453518237846
 
Posts: 21
Joined: Thu Nov 02, 2017 7:49 pm

Re: phase one DF+ LS80 and P30+

Postby C-M-B » Wed Jan 24, 2018 12:45 am

I think it's 2.31
C-M-B
 
Posts: 228
Joined: Thu Feb 25, 2010 4:57 pm


Return to Phase One 645DF and DF+ / Mamiya 645DF and DF+



Who is online

Users browsing this forum: No registered users and 2 guests