Shooting outdoor in snow | P25

Questions, comments and suggestions regarding Phase One P+ series and P series digital camera backs.

Argghhh

Postby Randall111 » Thu Feb 02, 2006 12:06 am

I just oredred 3 extra 1700's at my dealer's suggestion. How much loner usage time might I expect from the 2500's as opposed to the 1700's?
Randall111
 
Posts: 19
Joined: Wed Feb 01, 2006 11:24 pm

Re:

Postby quentin1 » Sat Feb 04, 2006 6:06 pm

BlasR wrote:Back to the original question..
the back have 3 holes one in the back firewire and 2 in the side..What about water and snow coming inside? anything that Phase one can do about the?

thanks

BlasR


is there any third party cap can be screwed on the two useless "holes"?
quentin1
 
Posts: 32
Joined: Thu Dec 29, 2005 5:07 am

Postby damienlovegrove » Sun Feb 05, 2006 12:58 am

Insulation tape does the job perfectly. It comes off clean afterwards and is less than 1$.
User avatar
damienlovegrove
DB Owner
 
Posts: 215
Joined: Tue Nov 02, 2004 7:58 pm
Location: Bristol UK

Postby Olivier111 » Mon Feb 13, 2006 2:20 pm

Hi all,

I just came back from a 3 days outdoor shooting (Ottawa's Winterlude : average temp: -18c + wind chill).

We had no problem shooting from 8:00am until 7:30pm (with a 1hour lunch break).

We used about 2.5 2000mAmps battery per day.

We did our weekend with a P25 and it worked flawlessly...

We are waiting for a P45, hope it's gonna be as reliable...

Cheers!
Olivier111
 
Posts: 159
Joined: Mon Feb 06, 2006 1:56 am
Location: Montreal, Quebec

Previous

Return to Phase One P+ and P series camera backs



Who is online

Users browsing this forum: No registered users and 2 guests