Fuji Lens Profiles in V12.0.2

General discussion regarding photography practices and Capture One workflow as well as integration with third party applications.
Please DO NOT post to this thread regarding OS specific concerns or questions.
Forum rules
For the sake of being thorough, please remember to note if you are using Mac or Windows.
Hopefully this will keep any confusion to a minimum.

Fuji Lens Profiles in V12.0.2

Postby David532 » Thu Feb 14, 2019 7:35 pm

I downloaded and installed v!2.0.2 today and was glad to see that it included Capture One generated lens profiles for all my Fuji prime lenses. However all my .RAF files are still defaulting to manufacturers profile and I have to select the new profile manually. Is there any way to make the default setting the new profile?

Dave
User avatar
David532
 
Posts: 297
Joined: Wed Mar 18, 2009 5:31 pm
Location: Thornbury, Uk

Re: Fuji Lens Profiles in V12.0.2

Postby David532 » Thu Feb 14, 2019 7:43 pm

Answered my own question, it only applies the new profiles automatically to fresh imports into the catalogue. Quite right to, I might have done something specific to existing files that I did not want to unexpectedly change.

BTW be careful to check that distortion slider is set to 100 when using new profiles it does not always happen automatically.
User avatar
David532
 
Posts: 297
Joined: Wed Mar 18, 2009 5:31 pm
Location: Thornbury, Uk

Re: Fuji Lens Profiles in V12.0.2

Postby Slice313 » Sun Mar 03, 2019 10:38 pm

David532 wrote:Answered my own question, it only applies the new profiles automatically to fresh imports into the catalogue. Quite right to, I might have done something specific to existing files that I did not want to unexpectedly change.

BTW be careful to check that distortion slider is set to 100 when using new profiles it does not always happen automatically.


"Capture One’s Distortion slider can be used to fine-tune either barrel or pincushion distortion correction, depending on the lens profile selected. The slider functionality automatically changes to suit the type of distortion. This is particularly convenient when the profile contains data for both barrel and pincushion distortion such as that found with zoom lenses."

Meaning, the Fuji lens profile you are using (lets say the XF 23MM F1.4) doesn't have any distortion information since the lens doesn't need any distortion correctionn.

However, if you shoot with a XF 27mm F2.8, you will notice that the distortion slider automatically goes to 100.
Slice313
 
Posts: 3
Joined: Thu Apr 07, 2016 9:01 pm

Re: Fuji Lens Profiles in V12.0.2

Postby Slice313 » Mon Mar 04, 2019 2:01 pm

David532 wrote:Answered my own question, it only applies the new profiles automatically to fresh imports into the catalogue. Quite right to, I might have done something specific to existing files that I did not want to unexpectedly change.

BTW be careful to check that distortion slider is set to 100 when using new profiles it does not always happen automatically.


For quickly apply the correct lens profiles to the already imported images, created an smart album with a filter rule including only the desire lens.

After that, select the smart album, click on a picture, go to the lens correction tool, select the profile, copy the lens settings to the click board, select all the pictures within the smart album and paste the settings. Easy and quick.

I already did this to my entire collection, problem solved :mrgreen:
Slice313
 
Posts: 3
Joined: Thu Apr 07, 2016 9:01 pm

Re: Fuji Lens Profiles in V12.0.2

Postby phil_1337 » Fri Apr 05, 2019 8:01 pm

Nice tips, thanks to both of you. It's a pity that XF zoom lenses are not supported yet since I do most of my work with zooms. The vignetting is sometimes not sufficiently corrected with the manufacturers profile, creating pretty harsh dark corners.
phil_1337
 
Posts: 24
Joined: Thu Jun 30, 2011 2:08 am

Re: Fuji Lens Profiles in V12.0.2

Postby NN635325789286086050UL » Sat Apr 20, 2019 10:13 am

I don’t understand why Capture One’s lense profiles would be better than the manufacture’s, in thus case Fuji. All the necessary corrections should be in the Metadata and CO1 only has to read it and make the adjustments. Am I missing something? I should mention that I come from Lightroom where the correction is an automatic process using the manufacturer’s metadata.
NN635325789286086050UL
 
Posts: 5
Joined: Tue Apr 08, 2014 7:35 pm


Return to Workflow and Common Photography Exploration



Who is online

Users browsing this forum: No registered users and 1 guest