Page 1 of 1

Issue with XF body cutting out whilst stacking.

PostPosted: Mon Mar 18, 2019 12:34 pm
by NNN636705341418121233
Hello, fellow phase oner's. I had an issue last week with an XF body shutting down and restarting, whilst using the automatic stacking program. I was using an iQ4 150mp back and a brand new 55mm Schneider macro ls 2.8 blue ring lens, we ran into the same issue with the 35mm Schneider ls 3.5 blue ring as well. We had a temperature warning earlier, from using the live view too much. I have not had issues stacking before, and I let the body and back cool down for ten minutes but still would only get through half (of a 30 image stack) before the body cut out and restarted. We ended up being pushed for time, so I did the stacking manually with no issues. Is this a common problem, is it related to body and back heat?

Re: Issue with XF body cutting out whilst stacking.

PostPosted: Mon Mar 18, 2019 7:29 pm
by Jon
To get started, please install the latest firmware update for IQ4/XF (1.03.26): https://www.phaseone.com/en/SupportMain/Camera-Firmware/XF

If the problem persists, please contact us in Support: https://www.phaseone.com/en/SupportMain