Page 1 of 1

Manual lens

PostPosted: Sun Oct 23, 2016 4:50 pm
by FPL
Do someone have any idea what exactly is suppose to do settings: Capture Setup -> Manual Lens -> On/Off ?

Re: Manual lens

PostPosted: Tue Oct 25, 2016 9:37 am
by Ulf
With this setting you are telling the body that a lens is mounted but it is a lens the body can not communicate with.
So it should ignore trying to set aperture as this is done mechanically on the lens.
Should be used when using old Mamiya C lenses. Or Hasselblad C or F lenses (with adaptor).

Re: Manual lens

PostPosted: Fri Nov 11, 2016 4:56 pm
by FPL
So I suppose that it just suppress error message and that's all.

BTW. While shooting with old lenses would be nice to use side dial to enter current aperture for EXIF.