Setting Focus Trim

Discussions regarding Phase One 645 XF
Also lens discussion for Phase One and Schneider lenses.

Setting Focus Trim

Postby uptownguydenver » Wed Oct 12, 2016 5:46 pm

When setting focus trim is there an aperture and subject distance that is preferred? The manual suggests using spot metering and that makes prefect sense. Thanks
uptownguydenver
 
Posts: 17
Joined: Tue Apr 26, 2016 7:42 am

Re: Setting Focus Trim

Postby JUK » Tue Oct 18, 2016 9:16 pm

Uptownguydenver,

Pick the distance and specific aperture you will be mainly shooting at. Set the camera on a tripod, tethered and set up a target at average shooting distance to your subject and adjust to that.
Kind regards,

Justin
Team Phase One Support

Please make a support case for technical support with Capture One software:
Http://support.phaseone.com and click on "Contact Support"

Connect with Phase One on our social media channels.
JUK
Crew
Crew
 
Posts: 20
Joined: Mon Jan 13, 2014 9:49 pm
Location: Melville, NY

Re: Setting Focus Trim

Postby uptownguydenver » Wed Feb 15, 2017 1:19 am

There is a webinar February 15th, 2017 on this subject.

"The XF Camera System: Hyperfocal Focus with Wide Angle Lenses"

If you miss it they are recorded and can usually be accessed the next day. Should be really helpful.
uptownguydenver
 
Posts: 17
Joined: Tue Apr 26, 2016 7:42 am


Return to Phase One 645 XF



Who is online

Users browsing this forum: No registered users and 1 guest