Credo40-DF-SensoA4-out-of-functional

Questions, comments and suggestions regarding Leaf Credo series digital camera backs.

Credo40-DF-SensoA4-out-of-functional

Postby crd4df » Tue Feb 02, 2016 12:22 pm

Hi all,

My system doesn't work, here the list : Credo 40, Mamiya DF, Senso A4 Broncolor. My light gen unit is linked and sync to the Mamiya DF by a 3.5 jack cable. When each parts are turned 'ON" and I press camera "shoot" button, the Mamiya DF writes STORE DB and flash unit is blocked no flash, the camera is blocked no shoot. I contacted Broncolor Paris, a director said to me that it can't be a cable issue It should work.
What I have to do to have all my system sync and functional for ever ?
Thanks For answers.
crd4df
 
Posts: 2
Joined: Mon Aug 25, 2014 1:57 pm

Re: Credo40-DF-SensoA4-out-of-functional

Postby Ulf » Thu Feb 04, 2016 5:50 pm

Hi

This sounds a bit strange.
STOR DB means Storage not available on Digital back.
One of the following reasons causes this.
If on CF card:
* No CF card
* CF card not formatted
* CF card full

If to computer
* Not connected
* Connection issue
* Capture folder not defined

In either card this should have nothing to do with the flash system.

Contact the Mamiya-Leaf partner from whom you purchased for assistance with trouble shooting.
Kind Regards
Ulf Liljegren
Phase One
Ulf
Site Admin
Site Admin
 
Posts: 3271
Joined: Wed Oct 06, 2004 1:52 pm
Location: Copenhagen Denmark

Re: Credo40-DF-SensoA4-out-of-functional

Postby crd4df » Sat Nov 19, 2016 7:45 am

It was set on FW. I had forgot this fantasy from mine.
crd4df
 
Posts: 2
Joined: Mon Aug 25, 2014 1:57 pm


Return to Leaf Credo series camera backs



Who is online

Users browsing this forum: No registered users and 1 guest