Firmware update iQ260

Questions, comments and suggestions regarding Phase One IQ3, IQ2 and IQ1 series digital camera backs.

Firmware update iQ260

Postby fabrizio cicconi » Wed Feb 15, 2017 7:13 pm

Hallo,
I've an iQ260 with PO DF+
the DB firmware is 8.00.30 and capture One 10.0.2 show me a new update for iQ260 8.03.14.
I clicked on the firmware update but in we website I didn't find the firmware download.
her only the new firmware of camera XF.
neither in the archive there is the firmware 8.03.14. it arrive only at 7.01.1

someone can tell me if is necessary to upgrade my DB or are only realize for XF camera?

Thank a lot,
Fabrizio
fabrizio cicconi
 
Posts: 187
Joined: Fri Jun 09, 2006 8:50 am

Re: Firmware update iQ260

Postby Ulf » Wed Feb 22, 2017 12:08 pm

Hi

Firmware has changed in to a firmware package which includes support for all IQ series backs and the XF body.
Basically a system update rather then individual files for every type of back.

You can use this on your camera back as well
http://www.phaseone.com/en/Products/Cam ... ate-3.aspx

Just download and put on a CF card.
Update like you have previously done.
Kind Regards
Ulf Liljegren
Phase One
Ulf
Site Admin
Site Admin
 
Posts: 3292
Joined: Wed Oct 06, 2004 1:52 pm
Location: Copenhagen Denmark

Re: Firmware update iQ260

Postby fabrizio cicconi » Wed Mar 01, 2017 5:08 pm

ok thank you very much!
My best.
fabrizio cicconi
 
Posts: 187
Joined: Fri Jun 09, 2006 8:50 am


Return to Phase One IQ3, IQ2 and IQ1 series camera backs



Who is online

Users browsing this forum: No registered users and 3 guests