Phase one P30+ back does not turn on, solid red LED

Questions, comments and suggestions regarding Phase One P+ series and P series digital camera backs.

Phase one P30+ back does not turn on, solid red LED

Postby srmenon » Mon Mar 19, 2018 7:26 am

Hi All,

I have experienced this issues on two occasions now with my back that I have taken approx 150 shots with. The when the battery is inserted, the back briefly flashed both the red and green LEDs, the green LED goes off and the red LED stays solid. If you open the cover for the CF card, the LED below the card slot is also solid red. This happens irrespective of whether there is a card in the slot or not. The first time, removing the battery and replacing it after a while helped, I am having no such luck this time.

I have read the manual and scanned the internet but it seems like a unique issue. Any leads or fixes?

Regards
S
srmenon
 
Posts: 3
Joined: Fri Sep 15, 2017 10:09 am

Re: Phase one P30+ back does not turn on, solid red LED

Postby Ulf » Mon Mar 19, 2018 2:23 pm

Hi

This means it has lost its firmware.
Contact us in support and we'll try to help you out
http://support.phaseone.com/
Kind Regards
Ulf Liljegren
Phase One
Ulf
Crew
Crew
 
Posts: 3399
Joined: Wed Oct 06, 2004 1:52 pm
Location: Copenhagen Denmark

Re: Phase one P30+ back does not turn on, solid red LED

Postby srmenon » Wed Mar 21, 2018 9:20 pm

Hi Ulf,

Proceeded as you suggested. Just stopping by to say thanks.

Regards
S
srmenon
 
Posts: 3
Joined: Fri Sep 15, 2017 10:09 am


Return to Phase One P+ and P series camera backs



Who is online

Users browsing this forum: No registered users and 2 guests