sync error in vertical mode Hasselblad V P25

Questions, comments and suggestions regarding Phase One P+ series and P series digital camera backs.

sync error in vertical mode Hasselblad V P25

Postby ckayjr » Mon Jan 17, 2005 6:03 am

I am having difficulty with the sync cord when connecting to the P25 in the vertical placement. The sync does not work when connected in the position on the \"top\" of the back while in this position. It will work in the location on the \"bottom\" of the back. Any thoughts on why this only works in one position? This error has occurred on 2 P25 backs. Thank you in advance for your responses.

Charles
ckayjr
 
Posts: 1
Joined: Mon Jan 17, 2005 5:48 am
Location: USA

Postby Ulf » Mon Jan 17, 2005 10:57 am

In cases like this you should rather contact your dealer which can give you quicker and more precise trouble shooting.
One thing you can try is to use the sync cable with multi connector instead of the minijack cable.
What it might be is that the minijack connector is going to far in to the camera back and my that causing short circuit, this can be check and sorted with a different cable, but please contact your dealer who can determine and if so replace malfunctioning cable through Phase One.
Ulf
Crew
Crew
 
Posts: 3441
Joined: Wed Oct 06, 2004 1:52 pm
Location: Copenhagen Denmark


Return to Phase One P+ and P series camera backs



Who is online

Users browsing this forum: No registered users and 4 guests