Page 1 of 1

edge pixel patterns with wide angle and 5x4 movements

PostPosted: Fri Jan 13, 2006 6:28 pm
by paul eccleston
Hi all anyone help?
we have P25 on Sinar and 35mm w/a lens, and with either stitching or lateral shifts we are getting a pixel pattern on one side of the image ( used Lens calibration not a colour issue) you can turn the back upside down and it happens on the reverse side. as we need to do panoramic interior shots it is an issue!

cheers
paul eccleston

paul@arthousedigital.com

PostPosted: Fri Jan 13, 2006 7:10 pm
by Ulf
Look at this knowledge base article and see if this apply to the phenomenon you describes:
http://support.phaseone.com/KB/Home/Sea ... nguageID=1
The pattern noise suppression you find in Capture One 3.7.3 in the focus tool as a check box.