edge pixel patterns with wide angle and 5x4 movements

Questions, comments and suggestions regarding Phase One P+ series and P series digital camera backs.

edge pixel patterns with wide angle and 5x4 movements

Postby paul eccleston » Fri Jan 13, 2006 6:28 pm

Hi all anyone help?
we have P25 on Sinar and 35mm w/a lens, and with either stitching or lateral shifts we are getting a pixel pattern on one side of the image ( used Lens calibration not a colour issue) you can turn the back upside down and it happens on the reverse side. as we need to do panoramic interior shots it is an issue!

paul eccleston

paul eccleston
Posts: 6
Joined: Fri Jan 13, 2006 6:21 pm
Location: cambridge uk

Postby Ulf » Fri Jan 13, 2006 7:10 pm

Look at this knowledge base article and see if this apply to the phenomenon you describes:
http://support.phaseone.com/KB/Home/Sea ... nguageID=1
The pattern noise suppression you find in Capture One 3.7.3 in the focus tool as a check box.
Posts: 3576
Joined: Wed Oct 06, 2004 1:52 pm
Location: Copenhagen Denmark

Return to Phase One P+ and P series camera backs

Who is online

Users browsing this forum: No registered users and 16 guests