645 body with Imacon Ixpress 384c

Discussions regarding Phase One 645 AF and Mamiya 645AFDIII Camera

645 body with Imacon Ixpress 384c

Postby chamuleau » Sat Sep 04, 2010 5:45 pm

i can not get this to work tethered (Phocus or Flexcolor). works fine handheld and releasing normally via camera but capturing from the software doesn't trip the shutter. anyone using a similar setup? I did choose mamiya AFD in the back's menu (can not choose AFD III) and the P1 645 is supposed to be cross-platform and backwards compitable so I did not anticipate this problem

Posts: 1
Joined: Sat Sep 04, 2010 7:26 pm

Re: 645 body with Imacon Ixpress 384c

Postby Ulf » Mon Sep 06, 2010 11:18 am


You should contact your dealer to figure out what part of your kit that is failing, or indeed the iXpress has this capability.
The dealer can probably test your back with a different body or the body with a different back.

Imacon support you should hopefully still be able to receive from Hasselblad A/S which is basically still Imacon but with the Hasselblad name.

http://www.hasselblad.com/service--supp ... ntact.aspx
Posts: 3515
Joined: Wed Oct 06, 2004 1:52 pm
Location: Copenhagen Denmark

Return to Phase One 645AF and Mamiya 645AFDIII

Who is online

Users browsing this forum: No registered users and 1 guest